In this work, a new method of preparing glass fiber/epoxy (GF/EP) composites with excellent solid particle erosion resistance and fracture toughness properties via thermoplastic polyurethane nonwoven fabric (TNF) was reported. TNF was prepared by virtue of the melt-blown (MB) process, and the composites were fabricated by vacuum-assisted resin transfer molding (VARTM) technique. Solid particle erosion characteristics of the composites were investigated in a confined space by impinging angular silica particles with a size about 300 μm. Compared with conventional GF/EP composites, the erosive wear resistance of TNF/glass fiber/epoxy (TNF/GF/EP) composites were improved by 99%, 108%, 205% and 493% at the impingement angles of 20°, 30°, 45° and 90°, respectively. Meanwhile, increase of 78% in G IC and 115% in G ⅡC were achieved. Microstructure characterizations, including scanning electron microscopy (SEM) and optical microscopy were performed to investigate the variations of microstructure and further to establish the relationship between epoxy matrix and glass fibers. This work suggests a promising routine to improve particle erosion resistance and fracture toughness by interleaving the laminates with lightweight thermoplastic polyurethane nonwoven fabrics.

Polymer matrix composites; Erosive wear; Interlaminar toughened; Glass fiber; Erosion rate; Thermoplastic polyurethanes

Zhengzhou University