Numerical simulation of flow regions in red mud separation thickener's feedwell by analysis of residence-time distribution

作者：Zhou, Tian; Li, Mao^*; Li, Qiu-long; Lei, Bo; Chenn, Qian-zhou; Zhou, Jie-min

来源：Transactions of Nonferrous Metals Society of China, 2014, 24(4): 1117-1124.

DOI：10.1016/S1003-6326(14)63170-8

• computational fluid dynamics
• residence-time distribution
• compartment model
• feedwell

The residence-time distribution (RTD) and the compartment model were applied to characterizing the flow regions in red mud separation thickener's feedwells. Combined with the experimental work, validated mathematical model as well as three-dimensional computational fluid dynamics (CFD) model was established to analyze the flow regions of feedwells on an industrial scale. The concept of RTD, although a well-known method for the characterization of mixing behavior in conventional mixers and reactors, is still a novel measure for the characterization of mixing in feedwells. Numerical simulation results show that the inlet feed rate and the aspect ratio of feedwells are the most critical parameters which affect the RTD of feedwell. Further simulation experiments were then carried out. Under the optimal operation conditions, the volume fraction of dead zone can reduce by 10.8% and an increasement of mixing flow volume fraction by 6.5% is also observed. There is an optimum feed inlet rate depending on the feedwell design. The CFD model in conjunction with the RTD analysis then can be used as an effective tool in the design, evaluation and optimization of thickener feedwell in the red mud separation.

• 出版日期2014-4
• 单位中南大学