Amorphization of quartz by friction: Implication to silica-gel lubrication of fault surfaces

作者：Nakamura Yu; Muto Jun^*; Nagahama Hiroyuki; Shimizu Ichiko; Miura Takashi; Arakawa Ichiro

来源：Geophysical Research Letters, 2012, 39: L21303.

DOI：10.1029/2012GL053228

To understand physico-chemical processes at real contacts (asperities) on fault surfaces, we conducted pin-on-disk friction experiments at room temperature, using single crystalline quartz disks and quartz pins. Velocity weakening from friction coefficient mu similar to 0.6 to 0.4 was observed under apparent normal stresses of 8-19 (18 > 19), when the slip rate was increased from 0.003 to 2.6 m/s. Frictional surfaces revealed ductile deformation of wear materials. The Raman spectra of frictional tracks showed blue shifts and broadening of quartz main bands, and appearance of new peaks at 490-520 and 610 cm(-1). All these features are indicative of pressure-and strain-induced amorphization of quartz. The mapping analyses of Fourier transform infrared (FT-IR) spectroscopy at room dry conditions suggest selective hydration of wear materials. It is possible that the strained Si-O-Si bridges in amorphous silica preferentially react with water to form silica-gel. In natural fault systems, amorphous materials would be produced at real fault contacts and accumulate over the fault surfaces with displacements. Subsequent hydration would lead to significant reduction of fault strength during slip. Citation: Nakamura, Y., J. Muto, H. Nagahama, I. Shimizu, T. Miura, and I. Arakawa (2012), Amorphization of quartz by friction: Implication to silica-gel lubrication of fault surfaces, Geophys. Res. Lett., 39, L21303, doi:10.1029/2012GL053228.

• 出版日期2012-11-6