Analysis of overflow critical value for TiAi based alloy melt during process of centrifugal casting

作者：Guo JJ; Sheng WB; Su YQ; Ding HS; Jia J

来源：Transactions of Nonferrous Metals Society of China, 1999, 9(2): 207-212.

• angular velocity
• TiAl base alloy
• pressure distribution
• centrifugal casting

The method combining theoretical analysis with experimental verification was adopted, and the pressure distribution of TiAl based alloy melt poured in permanent mould during the process of centrifugal casting was analyzed. The expression of extra pressure item Delta p and the relations between the maximum angular velocity omega(0max) and melt height H, pouring basin diameter D-0 were concluded. It provided theoretical guide for actual casting process. The analytical results showed that the pressure item affecting castings consists of static pressure and extra pressure during the process of centrifugal casting. The static pressure was determined by melt height, while the extra pressure was controlled by metal liquid density and rotating angular velocity. The pouring basin height and diameter should follow certain functional relation. Also, it showed that the value of maximum angular velocity decreased with increasing metal liquid height and pouring basin diameter.

• 出版日期1999-6
• 单位哈尔滨工业大学