Application of modified stir bar with nickel:zinc sulphide nanoparticles loaded on activated carbon as a sorbent for preconcentration of losartan and valsartan and their determination by high performance liquid chromatography

作者：Pebdani Arezou Amiri; Dadfarnia Shayesteh^*; Shabani Ali Mohammad Haji; Khodadoust Saeid; Haghgoo Soheila

来源：Journal of Chromatography A, 2016, 1437: 15-24.

DOI：10.1016/j.chroma.2016.02.004

• Losartan
• Valsartan
• Stir bar sorptive extraction
• HPLC
• Experimental design
• Urine
• Plasma

In this study, the stir bar was coated for the first time with the nicel:zins sulphide nanoparticles (Ni:ZnS NPs) loaded on activated carbon (AC) (Ni:ZnS-AC) as well as 1-ethyl-3-methylimidazolium hexafluorophosphate ionic liquid (IL) using sol gel technique and was used for stir bar sorptive extraction (SBSE) of losartan (LOS) and valsartan (VAL) as the model compounds. The extracted analytes were then quantified by high performance liquid chromatography (HPLC) equipped with an ultra violet detector. The best extraction performance for LOS and VAL was obtained through the optimization of the parameters affecting SBSE including pH of sample solution, ionic strength, extraction time, volume of desorption solvent, desorption time, and stirring speed. The fractional factorial design (FFD) was used to find the most important parameters, which were then optimized by the central composite design (CCD) and the desirability DF). Under the optimal experimental conditions, wide linear ranges of 0.4-50 mu g L-1 and 0.5-50 mu g L-1 and good RSDs (at level of 5 mu g L-1 and n = 6) of 4.4 and 4.9% were obtained for LOS and VAL, respectively. With the enrichment factors (EFs) of 188.6 and 184.8-fold, the limits of detection (LODs, SiN = 3) of the developed method were found to be 0.12 and 0.15 mu g L-1 for LOS and VAL, respectively. The developed method was successfully applied to the determination of LOS and VAL in urine and plasma matrices.

• 出版日期2016-3-11