Application of multi-scale (cross-) sample entropy for structural health monitoring

作者：Lin Tzu Kang^*; Liang Jui Chang

来源：Smart Materials and Structures, 2015, 24(8): 085003.

DOI：10.1088/0964-1726/24/8/085003

• structural health monitoring
• cross-sample entropy
• multi-scale

This study proposes an information-theoretic structural health monitoring (SHM) system based on multi-scale entropy (MSE) and multi-scale cross-sample entropy (MSCE). By measuring the ambient vibration signal from a structure, the damage condition can be rapidly evaluated via MSE analysis. The damage location can then be detected by analyzing the signals of different floors under the same damage condition via MSCE analysis. Moreover, a damage index is proposed to efficiently quantify the SHM process. Unlike some existing SHM methods, no experimental database or numerical model is required. Instead, a reference measurement of the current stage can initiate and launch the SHM system. A numerical simulation of a four-story steel structure is used to verify that the damage location and condition can be detected by the proposed SHM algorithm, and the location can be efficiently quantified by the damage index. A seven-story scaled-down benchmark structure is then employed for experimental verification. Based on the results, the damage condition can be correctly assessed, and average accuracy rates of 63.4 and 86.6% for the damage location can be achieved using the MSCE and damage index methods, respectively. As only the ambient vibration signal is required with a set of initial reference measurements, the proposed SHM system can be implemented practically with low cost.

• 出版日期2015-8