Development of hot stamped center pillar using form die with channel type indirect blank holder

作者：Choi H S; Kim B M^*; Nam K J; Ha S Y; Cha S H; Kang C G

来源：International Journal of Automotive Technology, 2011, 12(6): 887-894.

DOI：10.1007/s12239-011-0101-1

• Channel type indirect blank holder (CIBH)
• Hot stamping
• Tension force
• Slope angle
• Corner radius
• Center pillar
• Form die

The hot stamping process has been used in the automotive industry to reduce the weight of the body-in-white and to increase passenger safety via improved crashworthiness. However, defects such as fracture and wrinkle occur when hot stamping is performed using a conventional drawing or forming method. In this study, a channel-type indirect blank holder (CIBH) is proposed to develop a high-strength center pillar in form-type hot stamping, so that the aforementioned drawbacks are overcome. This type of blank holder plays an important role in reducing severe wrinkling at the flange; such wrinkling leads to folding after the completion of form-type hot-stamping. First, we investigated the effect of the channel shape on the indirect blank holding force by using a simplified two-dimensional plane-strain stamping process. Second, we selected the slope angle and corner radius of the channel as the main shape parameters by finite element analysis and artificial neural network (ANN). It is known that fracture at the hot formed wall and wrinkle at the flange are significantly affected by the slope angle of the channel, and the appropriate value for eliminating fracture and wrinkle is determined to be 99A degrees. By performing hot stamping using a form die with the selected channel, we can manufacture a high-strength center pillar without wrinkle and fracture.

• 出版日期2011-12