科研之友
微信
新浪微博
Facebook
分享链接
摘要
Hydraulic support is significant in the mining process because it serves as the primary supporting equipment in a coal mine. The roof beam and shield beam of hydraulic support are easily damaged because of the dynamic impact loads it has to bear. To improve its working performance, this study investigated the movement trend, pose, and mechanical response of hydraulic support when its roof beam and shield beam were subjected to impact loads. First, the roof beam, shield beam, and bars were made flexible using Hypermesh software. Then, a numerical simulation model of the hydraulic support was constructed using Adams software. The working resistance of the support was provided by two active external load signals applied vertically to the roof beam and located above the upper column. The impact load was applied along the normal direction of the top beam and the shield beam toward the symmetrical centre. The pose and stress state variations of the support were obtained under different impact conditions through measuring the variations of the rotation angles of the roof beam, deflection angles of the columns, length of the columns and balanced jack, and force of the hinge points. Results indicate that various trends of the hydraulic support under different impact effects are different, and in general, the support is more easily damaged when the impact load acts both on the roof beam and the shield beam compared with the single impact condition. This study is helpful for the stability control and structural design of the hydraulic support.
- 出版日期2018-3
- 单位中国矿业大学（北京）; 煤炭科学技术研究院有限公司
