Aluminum particle ignition in different oxidizing environments

作者：Mohan Salil; Furet Luc; Dreizin Edward L^*

来源：Combustion and Flame, 2010, 157(7): 1356-1363.

DOI：10.1016/j.combustflame.2009.11.010

• Metal ignition
• Heterogeneous reaction kinetics
• Laser ignition
• Aluminum oxidation

This paper presents experimental results on ignition of micron-sized spherical Al particles by a CO(2) laser in H(2)O/N(2), CO(2), air, H(2)O/air and CO(2)/O(2) gaseous environments. Al powder with nominal particle sizes in the range of 4.5-7 mu m is aerosolized using a parallel plate capacitor by charging particles contacting the electrodes. A thin, laminar aerosol jet is formed using a gas purged through the capacitor and issuing together with aerosolized particles through a small opening in the top electrode. The jet is fed into a focused CO(2) laser beam. A part of the gas mixture is fed as a shroud flow around the central aerosol jet to stabilize and shield the aerosol jet from surrounding air. The velocities of particles in the jet are varied in the range of 0.1-3 m/s. For the H(2)O-containing gas mixtures, the gas lines are heated to similar to 150 degrees C. A numerical simulation using Fluent CFD code is used to determine the gas composition at the laser focal spot. In experiments, for a given environment and selected particle velocity, the laser power is increased until the particles ignite. The ignition is detected optically using a photomultiplier. The laser power thresholds required for ignition of spherical aluminum particles are measured at varied particle velocities for each environment. The lowest thresholds are found for CO(2)/O(2) mixture and the highest for the H(2)O/N(2) mixture. Addition of O(2) to H(2)O or CO(2) reduces the ignition thresholds. The experimental data are processed to determine the kinetic parameters of a simplified Arrhenius description of the exothermic reaction leading to the particle ignition in different oxidizing environments.

• 出版日期2010-7