A Low-Density Graphite-Polymer Composite as a Bipolar Plate for Proton Exchange Membrane Fuel Cells

作者：Dhakate S R^*; Sharma S; Mathur R B

来源：Carbon Letters, 2013, 14(1): 40-44.

DOI：10.5714/CL.2012.14.1.040

• electrical conductivity
• mechanical properties
• bipolar plate
• proton exchange membrane fuel cell

The bipolar plate is the most important and most costly component of proton exchange membrane fuel cells. The development of a suitable low density bipolar plate is scientifically and technically challenging due to the need to maintain high electrical conductivity and mechanical properties. Here, bipolar plates were developed from different particle sizes of natural and expanded graphite with phenolic resin as a polymeric matrix. It was observed that the particle size of the reinforcement significantly influences the mechanical and electrical properties of a composite bipolar plate. The composite bipolar plate based on expanded graphite gives the desired mechanical and electrical properties as per the US Department of Energy target, with a bulk density of 1.55 g.cm(-3) as compared to that of similar to 1.87 g.cm(-3) for a composite plate based on natural graphite (NG). Although the bulk density of the expanded-graphite-based composite plate is similar to 20% less than that of the NG-based plate, the I-V performance of the expanded graphite plate is superior to that of the NG plate as a consequence of the higher conductivity. The expanded graphite plate can thus be used as an electromagnetic interference shielding material.

• 出版日期2013-1