科研之友
微信
新浪微博
Facebook
分享链接
摘要
Deep, investigation boreholes for suitable location of radioactive repositories and holes with larger diameter for storing such waste at great depth must be effectively isolated from the biosphere. A method for sealing boreholes by use of dense smectite clay where the rock is low-permeable and has only very fine fractures, and by concrete cast where the holes intersect water-bearing fracture zones, has been used for sealing of up to 500 m deep exploration boreholes in Sweden and Finland. The paper describes the practical conditions for construction of seals, and the processes that lead to the required tightness of the clay and concrete materials. Application of this technique to even deeper boreholes requires use of mud instead of water for stabilization and for moderating the rate of maturation. Placeability requires that the maturation of the initially unsaturated clay is neither too fast nor too slow and means of controlling the rate are described. The proposed concrete material has a very low cement content, and talc as fluidizer, which gives slow but ultimately very significant strengthening and low solubility of the cement reaction products. At a few kilometer depth the temperature can be more than 60 degrees C, which has to be sustained by the sealing materials, and this makes saponite and mixed-layer smectite/illite clay possible alternatives to pure smectites. The concept is judged to be applicable also to sealing of abandoned boreholes used for fracking.
- 出版日期2016-3-4
