Adsorption isotherms and kinetics of water vapor on novel adsorbents MIL-101(Cr)@GO with super-high capacity

作者：Yan Jian; Yu Ying; Ma Chen; Xiao Jing; Xia Qibin; Li Yingwei; Li Zhong^*

来源：Applied Thermal Engineering, 2015, 84: 118-125.

DOI：10.1016/j.applthermaleng.2015.03.040

• Novel composite
• Water vapor adsorption
• MIL-101(Cr)
• Graphite oxide
• Adsorption heat pumps

A novel composite (MIL-101@GO) of MIL-101 (Cr) and graphite oxide (GO) with high water vapor capacity for adsorption heat pumps (AHPs) was developed in this work. A series of composites MIL-101@GO with varied GO loading were synthesized using a hydrothermal method, and characterized by N-2 adsorption test, SEM, XRD, thermal gravimetric analysis. The adsorption isotherms and kinetics of water vapor over the composites were determined by gravimetric method. Regeneration performance of the composites was evaluated in multiple adsorption desorption cycles. Results showed that MIL-101@GO possessed a super-high adsorption capacity for water vapor up to 1.58 g/g, which was attributed to its ultrahigh Langmuir specific surface area (5188 m(2)/g) and pore volume (1.78 cm(3)/g). The isosteric heat of water vapor adsorption on MIL-101 @GO was calculated to be in the range of 44-56 kJ/mol, slightly higher than that on MIL-101 (44-53 kl/mol). Diffusion coefficients of water vapor over MIL-101@GO composites were ranged from 0.133 x 10(-10) to 4.485 x 10(-10) cm(2)/s at 298-313 K. Additionally, six consecutive adsorption desorption cycles suggesting that the synthesized MIL-101@GO had excellent reversibility and stability for water vapor adsorption. These superior water vapor adsorption/desorption performances make MIL-101@GO a promising candidate as the water vapor adsorbent for AHPs process.

• 出版日期2015-6-5
• 单位华南理工大学