Modification in Physical Properties of Organo Clay Filled Polyurethane Nanocomposites

作者:Pashaei Shahryar*; Hosseinzadeh Soleyman
来源:Polymer Science - Series A, 2014, 56(6): 874-883.
DOI:10.1134/S0965545X14060170

摘要

Polyurethane (PU) have been prepared by using polyether polyol (jagropol oil) and 1,6-hexamethylene diisocyanate (HMDI) as a cross-linker. The organically modified montmorillonite clay (o-MMT) is well dispersed into urethane matrix by in-situ polymerization method. A series of PU/o-MMT nanocomposites have been prepared by varying amounts viz., 1, 3, 5 and 6 wt % of nanoclay. The mechanical properties such as tensile strength, percentage elongation at break and tensile modulus of the composites were experimentally determined. The swelling behavior of the composites has been studied in different organic solvents. It was noticed that the swelling data of the composites significantly depends on the solubility parameters of the solvents. Microcrystalline parameters such as, lattice strain (g in %), average number of unit cells (< N >) in direction perpendicular to Bragg plane, surface weighted crystal size (D-s) and interplanar distance (d(hkl)), were calculated from X-ray patterns. These parameters were computed using Exponential asymmetric column length distribution functions. Morphological features of cryofractured PU/o-MMT composites were also analyzed using scanning electron microscopy (SEM).

  • 出版日期2014-11