A Low-Power High-Speed Hybrid ADC With Merged Sample-and-Hold and DAC Functions for Efficient Subranging Time-Interleaved Operation

作者：Zahrai Seyed Alireza; Zlochisti Marina; Le Dortz Nicolas; Onabajo Marvin^*

来源：IEEE Transactions on Very Large Scale Integration Systems, 2017, 25(11): 3193-3206.

DOI：10.1109/TVLSI.2017.2739108

• Analog-to-digital converter (ADC)
• clock feedthrough cancellation
• comparator-based asynchronous binary search (CABS) ADC
• offset calibration
• subranging
• successive approximation register (SAR)
• time-interleaved (TI)

An 8-bit 1-GS/s hybrid analog-to-digital converter (ADC) for high-speed low-power applications is introduced. It has a subranging architecture with a 3-bit flash ADC as a first stage and a 5-bit four-channel time-interleaved comparator-based asynchronous binary search (CABS) ADC as a second stage. In each channel, a merged sample-and-hold and capacitive digital-to-analog converter (SHDAC) performs the sampling and residue generation for the subranging operation. The effects of the parasitic capacitances on the SHDAC linearity are analyzed, and a linearity correction method is introduced to enable power-efficient high-speed operation in the presence of parasitics because the design approach allows reducing the sampling capacitance in the SHDAC. Furthermore, the sampling network configuration incorporates an error reduction technique to alleviate the clock feedthrough of bootstrap switches. The offsets of the comparators in the flash ADC are calibrated using a built-in reference signal via an extra sampling channel. According to postlayout simulations at 1 GS/s in 130-nm CMOS, the ADC has an effective number of bits higher than 7.37 bits up to the Nyquist frequency while consuming 13.3 mW from a 1.2V supply.

• 出版日期2017-11
• 单位东北大学