A 1-MJ capacitive energy storage

作者：Fridman B E^*; Li Baoming; Belyakov V A; Enikeev R Sh; Kovrizhnykh N A; Kryukov Yu L; Roshal' A G; Serebrov R A

来源：Instruments and Experimental Techniques, 2011, 54(5): 695-698.

DOI：10.1134/S0020441211040208

A capacitive energy storage is intended for generating high-power current pulses. The setup consists of two capacitive energy storage modules, a control console, and a cable collector for connecting a load to the setup. Each module is a capacitive energy storage with a 0.5-MJ stored energy and 18-kV voltage, which is based on eight capacitor cells with reverse switch-on dynistors as switches. The module volume is 1.3 m(3). The semiconductor switches in the capacitor cells are activated by light pulses, which are transmitted from the control console through fiber-optic cables. The unit is designed for operating in the programmable discharge mode, at which the semiconductor switches in the capacitor cells are switched on nonsimultaneously but in accordance with a specified program. When the discharge of all the cells is switched on simultaneously and the load is short-circuited, the maximal amplitude of the output current pulse is 800 kA. The rise time of the discharge current pulse of the cell is 150 mu s.

• 出版日期2011-9
• 单位南京大学