A lattice Boltzmann model for substrates with regularly structured surface roughness

作者：Yagub A; Farhat H^*; Kondaraju S; Singh T

来源：Journal of Computational Physics, 2015, 301: 402-414.

DOI：10.1016/j.jcp.2015.08.040

• Shan and Chen lattice Boltzmann model
• Multiphase flow and multi-component flow
• Apparent contact angle
• Superhydrophobic surfaces

Superhydrophobic surface characteristics are important in many industrial applications, ranging from the textile to the military. It was observed that surfaces fabricated with nano/micro roughness can manipulate the droplet contact angle, thus providing an opportunity to control the droplet wetting characteristics. The Shan and Chen (SC) lattice Boltzmann model (LBM) is a good numerical tool, which holds strong potentials to qualify for simulating droplets wettability. This is due to its realistic nature of droplet contact angle (CA) prediction on flat smooth surfaces. But SC-LBM was not able to replicate the CA on rough surfaces because it lacks a real representation of the physics at work under these conditions. By using a correction factor to influence the interfacial tension within the asperities, the physical forces acting on the droplet at its contact lines were mimicked. This approach allowed the model to replicate some experimentally confirmed Wenzel and Cassie wetting cases. Regular roughness structures with different spacing were used to validate the study using the classical Wenzel and Cassie equations. The present work highlights the strength and weakness of the SC model and attempts to qualitatively conform it to the fundamental physics, which causes a change in the droplet apparent contact angle, when placed on nano/ micro structured surfaces.

• 出版日期2015-11-15