A one-stage, high-load capacity separation actuator using anti-friction rollers and redundant shape memory alloy wires

作者：Yan Xiaojun; Huang Dawei; Zhang Xiaoyong^*; Liu Ying; Yang Qiaolong

来源：Review of Scientific Instruments, 2015, 86(12): 125005.

DOI：10.1063/1.4938178

This paper proposes a SMA (shape memory alloy) wire-based separation actuator with high-load capacity and simple structure. The novel actuator is based on a one-stage locking mechanism, which means that the separation is directly driven by the SMA wire. To release a large preload, a group of anti-friction rollers are adopted to reduce the force for triggering. In addition, two SMA wires are used redundantly to ensure a high reliability. After separation, the actuator can be reset automatically without any auxiliary tool or manual operation. Three prototypes of the separation actuator are fabricated and tested. According to the performance test results, the actuator can release a maximum preload of 40 kN. The separation time tends to decrease as the operation current increases and it can be as short as 0.5 s under a 7.5 A (the voltage is 5.8 V) current. Lifetime test indicates that the actuator has a lifetime of more than 50 cycles. The environmental tests demonstrate that the actuator can endure the typical thermal and vibration environment tests without unexpected separation or structure damage, and separate normally after these environment tests.

• 出版日期2015-12
• 单位北京航空航天大学