A method for double-sided friction stir spot welding

作者：Cox Chase D^*; Gibson Brian T; DeLapp David R; Strauss Alvin M; Cook George E

来源：Journal of Manufacturing Processes, 2014, 16(2): 241-247.

DOI：10.1016/j.jmapro.2013.10.006

• Friction stir spot welding
• Friction stir welding
• Spot welding
• Computational fluid dynamic model

A rotating anvil similar to a pinless friction stir welding (FSW) tool can be applied to friction stir spot welding (FSSW) of thin metal plates. FSSW is a solid-state joining process that is currently being used by automotive manufacturers as an alternative to rivets and traditional resistance spot welding. The principal detractor of this process is the keyhole left by pin extraction, which can be detrimental to the weld strength. A pinless tool can be used to eliminate the keyhole. However, this approach is limited to joining thin sheet (<= 1 mm). Using a rotating anvil with the FSSW process permits the joining of thicker cross sections, improves the mechanical strength of the spot weld and reduces the reaction forces on the spot welding frame. A numerical model of the process, tensile shear tests and macrosection analysis are used to evaluate the spot welds.
Macrosection and numerical analysis reveals that the material flow between the pinless tool and rotating anvil is complex and unique to this process. It has been found that the use of a rotating anvil for FSSW is a viable means to create quality spot welds in thicker weldments.

• 出版日期2014-4