Microwave-assisted synthesis of LiNi0.5Co0.5O2 cathode material for lithium batteries using PAM as template

作者：Yang ST^*; Yue HY; Yin YH; Yang JX; Yang WG

来源：Electrochimica Acta, 2006, 51(23): 4971-4976.

DOI：10.1016/j.electacta.2006.01.041

• template
• microwave
• PAM
• cathode material
• Li ion battery

Layeredcathode materials LiNi0.5Co0.5O2 were successfully synthesized by microwave-assisted method using polyacrylamide (PAM) as template. Effects of the PAM concentration, sintering temperature and time on the morphology, microstructure and electrochemical performance of the materials were systematically investigated. X-ray diffraction (XRD) patterns reveal that the sample prepared with 8 wt.% PAM and sintered at 1023 K for 4 It shows the best ordering layered structure with the maximum 1(003)11(104) ratio and the largest distance of splitting diffraction peaks of the crystal plants (006) and (012), (018) and (110). It can be seen that the above sample is composed of sphere-like particle from the scanning electronic microscopies (SEM) observation. The charge-discharge experiments indicate that the sample, compared with the samples prepared under other conditions, also has the best electrochemical properties, with the largest discharge capacity of 154 mAh/g and the capacity retention of 145 mAh/g after 20 cycles at a 0.2C rate between 3.0 and 4.3 V. The study confirmed that the application of microwave is in favor of the formation of nuclei, which plays a key role in shortening the synthetic time and reducing the sintering temperature.

• 出版日期2006-6-15
• 单位河南师范大学