科研之友
微信
新浪微博
Facebook
分享链接
摘要
In this paper, we report on the fabrication and analytical characterization of the screen-printed p-Si interdigitated back contact (IBC) cells with the conversion efficiency of 20.08%, with open-circuit voltage of 645 mV, short-circuit current density of 40.15 mA/cm(2), and fill factor of 77.51%. The cell performance has also been confirmed with the analytical calculation based on the electrical properties measured. It also shows that, with the proper emitter design, the open-circuit voltage of 680 mV and conversion efficiency of 22% are readily attainable for the screen-printed p-Si IBC cell. Compared with the screen-printed IBC cells, the passivated emitter and rear "contact" cell may perform equivalently well, provided that any improvement on S-eff of the front surface does not compromise the light absorption and emitter resistance of the cell.
- 出版日期2017-9
- 单位清华大学
