摘要

We report an active Q-switching with different coded schemes generated in the high power diode end pumped Nd:YVO4 laser (DEPSS) using two different techniques of special combination of optical choppers and acousto-optic modulator (AOM) at higher repetition rates of 100 kHz for the first time to the best of our knowledge in any practical laser target designation (LTD) systems. The highest peak power of 95.4 kW with the lowest pulse repetition frequency of 222 Hz and pulse width of 46 ns at FWHM with the pulse-to-pulse stability of similar to 95% was measured at certain regime of operation. Special modulation and coding of high stable, high peak power Nd:YVO4 laser pulses at 1064 nm using the combination of different optical chopper blades were achieved. A high peak power of more than 4.84 kW with the shortest pulse width of 25 ns at FWHM has been obtained using an acousto-optic modulator (AOM) as an active Q-switched. The pulse-to-pulse stability was measured and improved to be similar to 97% at high repetition rate ranges from 10 kHz to 100 kHz. The correlation between the coded laser irradiation (transmitted) and the scattered (received) laser signals for three different targets materials of sand, wood and metal using this laser designation system are examined and discussed.

  • 出版日期2014-12