科研之友
微信
新浪微博
Facebook
分享链接
摘要
The beam element in FLAC(3D) can be used to simulate the supporting arch in a tunnel. However, this approach has the shortcoming of its constitutive model, and the bearing capacity and surrounding rock supporting effect of the arch model will be significantly exaggerated. To simulate the supporting arch in tunnel engineering well, a new approach is proposed by improving the beam element. The yield criterion of the beam element subjected to compression-bending loads is established based on the now-available bearing capacity formulas of some typical compression-bending sections. In addition, the yield criterion is embedded in the FLAC(3D) main program by using the FISH language, and the modification of the beam model and the yielding failure simulation of the supporting arch are finally implemented. Compression-bending tests and roadway tunnel arch support example analysis were performed. The results are as follows: (1) the modified model showed the dependence of the bending moment and axial force on the yielding action of the beam element under compression-bending loads; (2) the implementation program is effective and sensitive; (3) the computing deviation caused by the shortcomings of the original beam element model was effectively suppressed, the mechanical behavior and surrounding rock supporting laws exhibited by the arch model were much closer to reality, and the calculation accuracy and design reliability were improved by the new simulation approach.
- 出版日期2017-3
- 单位山东科技大学
