科研之友
微信
新浪微博
Facebook
分享链接
摘要
To transfer the preplan for the head and neck brachytherapy to the clinical implantation procedure, a preplanbased 3D-printed individual template for needle insertion guidance had previously been designed and used. The accuracy of needle insertion using this kind template was assessed in vivo. In the study, 25 patients with head and neck tumors were implanted with I-125 radioactive seeds under the guidance of the 3D-printed individual template. Patients were divided into four groups based on the site of needle insertion: the parotid and masseter region group (nine patients); the maxillary and paranasal region group (eight patients); the submandibular and upper neck area group (five patients); and the retromandibular region group (six patients). The distance and angular deviations between the preplanned and placed needles were compared, and the complications and time required for needle insertion were assessed. The mean entrance point distance deviation for all 619 needles was 1.18 +/- 0.81 mm, varying from 0.857 +/- 0.545 to 1.930 +/- 0.843 mm at different sites. The mean angular deviation was 2.08 +/- 1.07 degrees, varying from 1.85 +/- 0.93 to 2.73 +/- 1.18 degrees at different sites. All needles were manually inserted to their preplanned positions in a single attempt, and the mean time to insert one needle was 7.5 s. No anatomical complications related to inaccurately placed implants were observed. Using the 3D-printed individual template for the implantation of I-125 radioactive seeds in the head and neck region can accurately transfer a CT-based preplan to the brachytherapy needle insertion procedure. Moreover, the addition of individual template guidance can reduce the time required for implantation and minimize the damage to normal tissues.
- 出版日期2016-11
- 单位北京大学
