An Impedancemetric NH3 Sensor Based on La10Si5MgO26 Electrolyte and Nano-Structured CoWO4 Sensing Electrode

作者：Dai, Lei; Meng, Weiwei; Meng, Wei; Zhou, Huizhu^*; Yang, Guixia; Li, Yuehua; Wang, Ling^*

来源：Journal of the Electrochemical Society, 2016, 163(3): B1-B7.

DOI：10.1149/2.0551603jes

• OXIDE FUEL-CELLS
• AMPEROMETRIC NO2 SENSOR
• EXHAUST-GAS SENSOR
• SOLID-ELECTROLYTE
• STABILIZED ZIRCONIA
• SELECTIVE DETECTION
• IONIC-CONDUCTIVITY
• HIGH-TEMPERATURE
• AMMONIA SENSORS
• PERFORMANCE

A new type impedancemetric NH3 sensor was fabricated using nano-structured CoWO4 sensing electrode and La10Si5MgO26 (LSMO) electrolyte. The CoWO4 particles with 100 nm in diameter were in-situ prepared in the porous LSMO layer by impregnation method. The properties of the sensor were studied using electrochemical impedance spectroscopy in the temperature range of 400-700 degrees C. The equivalent circuits were designed, with the help of which the measured impedance spectra were fitted to extract the equivalent circuit parameters for a preliminary analysis of the impedancemetricelectrochemical sensing mechanism. The results show that the obtained impedance spectra of the sensor under different NH3 concentrations are correlated to the CoWO4 electrode/LSMO/NH3 triple phase boundary (TPB). The response signals defined as (vertical bar Z vertical bar(base)-vertical bar Z vertical bar(sample))/vertical bar Z vertical bar(base) at a fixed frequency in the low frequency region vary linearly with the NH3 concentrations from 20 to 500 ppm. The sensor also shows good response-recovery characteristics and low cross-sensitivities to the various co-existing gases.

• 出版日期2016
• 单位中国科学技术大学