A Z-Transform Method for Synthesis of Unequal-Length Multisection Transmission Lines for Multiband Applications

作者：Kim Joonsuk; Lee Yongshik^*

来源：IEEE Transactions on Microwave Theory and Techniques, 2017, 65(9): 3200-3210.

DOI：10.1109/TMTT.2017.2678474

• Impedance transformer
• multiband
• multisection
• stepped impedance
• unequal length
• Wilkinson power dividers
• Z-transform

A method based on the Z-transform is demonstrated to cascade transmission line sections of unequal lengths and achieve multiband and/or wideband properties. Unlike previous methods based on the Z-transform, the proposed method associates the z(-1) term with the infinitesimal length of the unit segment. Consequently, any electrical length can be expressed in the z(-1) form. Therefore, while the previous methods are restricted to cascading lines of a commensurate length only, the proposed method can be applied to those of incommensurate lengths. Furthermore, the z-polynomials for triple or more bands can be constructed by multiplying a combination of single-and dual-band polynomials, which remarkably simplifies the entire procedure to develop multiband and/or wideband circuits with virtually no limitation in terms of the number and/or combination of frequencies. The validity and practicality of the proposed method is verified with experimental results for various impedance transformers for real loads and Wilkinson power dividers; the results show the independence in the number and combination of operating frequencies as well as a dual-band operation with a center frequency ratio as large as 7.75.

• 出版日期2017-9