Process Design of a Ball Joint, Considering Caulking and Pull-Out Strength

作者：Sin Bong Su; Lee Kwon Hee^*

来源：The Scientific World Journal, 2014, 2014: 971679.

DOI：10.1155/2014/971679

A ball joint for an automobile steering system is a pivot component which is connected to knuckle and lower control arm. The manufacturing process for its caulking comprises spinning and deforming. In this study, the process was simulated by flexible multibody dynamics. The caulking was evaluated qualitatively through numerical analysis and inspecting a plastically deformed shape. The structural responses of a ball joint, namely, pull-out strength and stiffness, are commonly investigated in the development process. Thus, following the caulking analysis, the structural responses were considered. In addition, three design variables related to the manufacturing process were defined, and the effects of design variables with respect to pull-out strength, caulking depth, and maximum stress were obtained by introducing the DOE using an L-9 orthogonal array. Finally, the optimum design maximizing the pull-out strength was suggested. For the final design, the caulking quality and the pull-out strength were investigated by making six samples and their tests.

• 出版日期2014