Feature Processing Method from Part Design Model to Casting Model Based on Creo [基于Creo从零件设计模型到铸件模型的特征处理方法]

作者：Liu J.-F.; Dong Y.-D.^*; Cui Y.-X.; Zhou G.; Zou W.-B.; Liu Y.-Z.

来源：Foundry, 2021, 70(5): 532-539.

• Batch suppression of features
• Casting model
• Encapsulation
• Feature modeling technology
• Feature recognition

Aiming at the cumbersomeness of the tediousness and complexity of the processing of the volume and surface features during the transformation from part design model to casting model before numerical simulation of casting, this paper propose a method for the feature processing from design model to casting model. This method is based on actual production requirements and feature-based modeling technology, using Creo 2.0 as the research and development platform to achieve the optimization of the feature processing process in the transformation. First, based on the feature recognition, it traverses all features in the model, and suppresses the features unsuitable for casting in batches; Secondly, the offset and substitution commands of flexible modeling are encapsulated, and the requirement of adding machining allowance is realized by thickening and replacing with reference surface. The effectiveness of the proposed method is verified by taking the cabin in aerospace parts as an example.

• 出版日期2021
• 单位合肥工业大学