科研之友
微信
新浪微博
Facebook
分享链接
摘要
Computational fluid dynamics (CFD) was used to study aerosol penetration through the entrance section of a bell-shaped omnidirectional ambient aerosol sampling inlet. The entrance section did not include either an insect screen or a large-particle pre-separator. Simulations of the flow field were carried out for wind speeds of 2, 8, and 24 km/h and a fixed exhaust flow rate of 100 L/min; and, particle tracking was performed for 2 to 20 mu m aerodynamic diameter particles. Penetration calculated from CFD simulations was in excellent agreement with experimental results from previous studies with the root mean square relative error between simulation and experimental data being 3.8%. CFD results showed that the most significant regional particle deposition occurred on the upwind side of a curved flow passage between two concentric axisymmetric shells of the inlet housing and that deposition at the leading edges of the shells and within the exhaust tube was far less significant. At a wind speed of 2 km/h, penetration was affected by gravitational settling, e. g., penetration of 20 mu m particles was 71.9% when gravity was included and 80.4% without gravity. At higher wind speeds gravity had little effect. An empirical equation was developed to relate aerosol penetration to a Stokes number, a gravitational settling parameter, and a velocity ratio. Good fits of the correlation curves to experimental data and numerical results were obtained.
- 出版日期2010
