科研之友
微信
新浪微博
Facebook
分享链接
摘要
Carbon encapsulated graphite was prepared by coating polyurea on the surface of natural graphite particles via interfacial polymerization followed by a pre-oxidation at 250 degrees C in air and a heat treatment at 850 degrees C in nitrogen. FT-IR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to investigate the structure of the graphite before and after the surface modification. Galvanostatic cycling, dc impedance spectroscopy, and cyclic voltammetry were used to investigate the electrochemical properties of the modified graphite as the anode material of lithium cells. The modified graphite shows a large improvement in electrochemical performance such as higher reversible capacity and better cycleability compared with the natural graphite. It can work stably in a PC-based electrolyte with the PC content up to 25 vol.% because the encapsulated carbon can depress the co-intercalation of solvated lithium ion. The initial coulombic efficiency of C-NG and NG in non-PC electrolyte is 74.9 and 88.5%, respectively.
- 出版日期2005-8-30
- 单位安徽大学
