An Acoustic Model for Automatic Control of a Slide Flute

作者：d'Andrea Novel Brigitte^*; Fabre Benoit; Coron Jean Michel

来源：Acta Acustica United with Acustica, 2010, 96(4): 713-721.

DOI：10.3813/AAA.918325

In this paper, we consider the problem of modeling and control of a slide flute: a kind of recorder without finger holes but which is ended by a piston mechanism to modify the length of the resonator. A previous study has been done (see [1]), but with a very simple boundary condition for the mouth, corresponding to an ideal situation assuming that the acoustic pressure is zero at the entrance of the resonator.
In this work, we have taken into account a more realistic model, describing the coupling effects between the jet and the pipe. The jet is obtained by blowing through a flue channel and formed by flow separation at the flue exit, and finally directed towards a sharp edge, called the labium. The resulting structure can then be seen as a nonlinear oscillator coupled with the pipe which is a linear acoustic resonator. The pressure obtained through this model has been compared to the pressure measured on an actual instrument, a recorder closed at its end.
A modal analysis is then performed using the linearized boundary conditions which can also be used to compute the suitable blowing pressure and the suitable pipe length to obtain a desired fundamental frequency or equivalently a desired pitch. This will constitute the basis of our control algorithm.
A possible musical application of such a device is to build a flue instrument with a pitch independent of the dynamical level.

• 出版日期2010-8