Limit loads for pipe bends under combined pressure and out-of-plane bending moment based on finite element analysis

作者：Li Jian; Zhou Chang Yu^*; Xue Ji Lin; He Xiao Hua

来源：International Journal of Mechanical Sciences, 2014, 88: 100-109.

DOI：10.1016/j.ijmecsci.2014.07.012

• Pipe bends
• Out-of-plane bending moment
• Internal pressure
• Limit loads
• Finite element analysis

In present work, limit loads for pipe bends under combined internal pressure and out-of-plane bending moment have been investigated systematically via finite element simulation based on both small displacement analysis and large displacement analysis. By normalized methods, a wide range of non-dimensional parameters were considered and limit bending moment expression has been suggested which shows that r/t is the main factor affecting the limit bending moment. In addition, the effect of internal pressure on the limit loads was studied in detail which is significant for thin walled pipe bends. It is found that yield strain epsilon(0) has an obvious effect on limit load based on large displacement analysis. According to the finite element results, practicable engineering assessment equations of limit loads have been proposed for pipe bends under combined loads. These proposed equations are validated with experiment data and also justified to be a good choice for limit loads assessment.

• 出版日期2014-11