科研之友
微信
新浪微博
Facebook
分享链接
摘要
This paper presents the design, construction and tests of a traveling-wave thermoacoustic electric generator. A two-stage traveling-wave thermoacoustic engine converts thermal energy to acoustic power. Two low-impedance linear alternators (i.e., audio loudspeakers) were installed to extract and convert the engine's acoustic power to electricity. The coupling mechanism between the thermoacoustic engine and alternators has been systematically studied numerically and experimentally, hence the optimal locations for installing the linear alternators were identified to maximize the electric power output and/or the thermal-to-electric conversion efficiency. A ball valve was used in the loop to partly correct the acoustic field that was altered by manufacturing errors. A prototype was built based on this new concept, which used pressurized helium at 1.8 MPa as the working gas and operated at a frequency of about 171 Hz. In the experiment, a maximum electric power of 204W when the hot end temperature of the two regenerators reaches 512 degrees C and 452 degrees C, respectively. A maximum thermal-to-electric efficiency of 3.43% was achieved when the hot end temperature of the two regenerators reaches 597 degrees C and 511 degrees C, respectively. The research results presented in this paper demonstrate that multi-stage traveling-wave thermoacoustic electricity generator has a great potential for developing inexpensive electric generators.
- 出版日期2015-1-1
- 单位北京理工大学
