A Novel Hybrid Axial-Radial Atmospheric Plasma Spraying Technique for the Fabrication of Solid Oxide Fuel Cell Anodes Containing Cu, Co, Ni, and Samaria-Doped Ceria

作者：Cuglietta Mark^*; Kuhn Joel; Kesler Olivera

来源：Journal of Thermal Spray Technology, 2013, 22(5): 609-621.

DOI：10.1007/s11666-013-9918-7

• anode
• cobalt
• copper
• nickel
• plasma spray
• samaria-doped ceria (SDC)
• solid oxide fuel cell (SOFC)

Composite coatings containing Cu, Co, Ni, and samaria-doped ceria (SDC) have been fabricated using a novel hybrid atmospheric plasma spraying technique, in which a multi-component aqueous suspension of CuO, Co3O4, and NiO was injected axially simultaneously with SDC injected radially in a dry powder form. Coatings were characterized for their microstructure, permeability, porosity, and composition over a range of plasma spray conditions. Deposition efficiency of the metal oxides and SDC was also estimated. Depending on the conditions, coatings displayed either layering or high levels of mixing between the SDC and metal phases. The deposition efficiencies of both feedstock types were strongly dependent on the nozzle diameter. Plasma-sprayed metal-supported solid oxide fuel cells utilizing anodes fabricated with this technique demonstrated power densities at 0.7 V as high as 366 and 113 mW/cm(2) in humidified hydrogen and methane, respectively, at 800 degrees C.

• 出版日期2013-6