科研之友
微信
新浪微博
Facebook
分享链接
摘要
Modal identification of engineering structure in operation deals with the estimation of modal parameters from vibration data obtained in working conditions rather than laboratory conditions. After one structure destruction during a flight test, it was strongly required to carry out full-scale model testing to acquire the low-frequency vibration acceleration data of the investigated rocket (its structural dynamic properties could be represented by a beam). These vibration data were used to assess the modal properties of the modified structure. In this paper, a new modal identification method based on vibration displacement is suggested. The displacements of the measured points on the rocket are obtained by the integration of the low-frequency vibration accelerations during free flight test. In the method, the data are filtered through wavelet transform. For comparison, several methods are used to extract the modal frequencies of the investigated beam. In terms of the results of standard deviation of identified frequencies, it is believed that the generalized displacement-based modal identification method is more practicable in modal identification for similar problems.
- 出版日期2012-10
- 单位中国人民解放军国防科学技术大学
