Analytical solution of velocity for ammonia-water horizontal falling-film flow

作者：Zhang, Qiang^*; Gao, Yide

来源：Applied Thermal Engineering, 2016, 101: 131-138.

DOI：10.1016/j.applthermaleng.2016.03.003

• Ammonia-water
• Horizontal falling film flow
• Modeling
• Analytical solution
• Simulation

A new horizontal tube falling film velocity model was built and calculated to analyze the problem of film flow conditions. This model also analyzed the film thickness distribution in horizontal tube falling film flow and considered the effect of the inertial force on velocity. The film thickness and velocity profile can be obtained based on the principle of linear superposition, a method of separation of variables that introduces the effect of variable inertial force on the velocity profile in the process of falling-film absorption. The film flow condition and the film thickness distribution at different fluid Reynolds numbers (Re) and tube diameters were calculated and compared with the results of the Crank-Nicolson numerical solution under the same conditions. The results show that the film flow condition out of a horizontal tube and that the film thickness increases with the fluid Re. At a specific Re and suitable tube diameter, the horizontal tube reaches a more uniform film. Finally, the analysis results have similar trend with the experimental and numerical predicted data in literature.

• 出版日期2016-5-25
• 单位天津大学