摘要

The pore space anisotropy of pharmaceutical compacts was evaluated in relation to the mechanical property anisotropy.
The topology and the pore space anisotropy were characterized by PGSTE-NMR measurements. Parallelepipedical compacts of anhydrous calcium phosphate (aCP) and microcrystalline cellulose (MCC) were tested on top, bottom and side faces. A microindentation and three-point single beam tests were used to measure Brinell hardness, tensile strength and Young's modulus. All the data were submitted to a statistical analysis to test for significance.
The porous structure of MCC compacts was anisotropic, contrary to those of aCP. The analysis of the pore space by PGSTE-NMR method showed that its structural anisotropy was controlled by the behaviour under compaction of the excipients. At the same time, the Young's modulus and the tensile strength were the same whatever the direction of testing. For the aCP compacts, all the faces had the same Brinell hardness. With MCC compacts, only the bottom face showed a lower Brinell hardness.
Except for Brinell hardness measured on MCC compacts, the tested samples were characterized by anisotropic mechanical properties when its porous structures were sometimes anisotropic. Then, there is not a straight link between porosity anisotropy and mechanical properties.

  • 出版日期2010-10