科研之友
微信
新浪微博
Facebook
分享链接
摘要
In order to improve the surface performance of Al-Zn-Mg-Mn-Zr extruded alloy, alumina coatings were directly prepared on the alloy in silicate electrolytes by direct current micro-arc oxidation technique. The relationship between discharge stages and technology parameters was studied, and then the growth behaviors, structure, composition and properties of coatings were further analyzed. Our work suggests that appropriately prolonging of the oxidation time at a low current density of 2 A/dm(2) can help to extend the action time of the micro-arc stage (Stage III) and to form a thicker layer with fewer inner defects. The compact inner structure promotes the hardness, elastic modulus as well as the corrosion resistance of the coatings. In contrast, the higher the current density, the earlier the discharge enters into the big arc stage (Stage IV), which has an adverse impact on the structure and properties of the coatings. In the Stage IV, the porosity of the coatings increases with the generation of mullite within the coatings comprise of gamma-Al2O3 and alpha-Al2O3. The growing direction of coatings changes from outward mainly to inward in the late stage of the micro-arc oxidation (MAO) process.
