Analysis of the Heat Transfer Driving Parameters in Tight Rotor Blade Tip Clearances

作者：Lavagnoli Sergio^*; De Maesschalck Cis; Paniagua Guillermo

来源：Journal of Heat Transfer, 2016, 138(1): 011705.

DOI：10.1115/1.4031131

• heat transfer
• adiabatic wall temperature
• cooling law
• convective heat transfer coefficient
• tip flows
• turbine

Turbine rotor tips and casings are vulnerable to mechanical failures due to the extreme thermal loads they undergo during engine service. In addition to the heat flux variations during the engine transient operation, periodic unsteadiness occurs at every rotor passage, with amplitude dependent on the tip gap. The development of appropriate predictive tools and cooling schemes requires the precise understanding of the heat transfer mechanisms. The present paper analyses the nature of the overtip flow in transonic turbine rotors running at tight clearances and explores a methodology to determine the relevant flow parameters that model the heat transfer. Steady-state three-dimensional Reynolds-averaged Navier-Stokes (RANS) calculations were performed to simulate engine-like conditions considering two rotor tip gaps, 0.1% and 1%, of the blade span. At tight tip clearance, the adiabatic wall temperature is no longer independent of the solid thermal boundary conditions. The adiabatic wall temperature predicted with the linear Newton's cooling law was observed to rise to unphysical levels in certain regions within the rotor tip gap, resulting in unreliable convective heat transfer coefficients (HTCs). This paper investigates different approaches to estimate the relevant flow parameters that drive the heat transfer. A novel four-coefficient nonlinear cooling law is proposed to model the effects of temperature-dependent gas properties and of the heat transfer history. The four-parameter correlation provided reliable estimates of the convective heat transfer descriptors for the 1% tip clearance case, but failed to model the tip heat transfer of the 0.1% tip gap rotor. The present study allows experimentalists to retrieve information on the gap flow temperature and convective HTC based on the use of wall heat flux measurements. The use of nonlinear cooling laws is sought to improve the evaluation of the rotor heat transfer data while enhancing the understanding of tight-clearance overtip flows.

• 出版日期2016-1