Activated carbon from sewage sludge for removal of sodium diclofenac and nimesulide from aqueous solutions

作者：dos Reis Glaydson Simoes; Bin Mahbub Mohammad Khalid; Wilhelm Michaela; Lima Eder Claudio; Sampaio Carlos Hoffmann; Saucier Caroline; Pereira Dias Silvio Luis

来源：Korean Journal of Chemical Engineering, 2016, 33(11): 3149-3161.

DOI：10.1007/s11814-016-0194-3

• Sewage Sludge
• Activated Carbons
• Adsorption of Pharmaceuticals
• Water and n-Heptane Adsorptions
• Adsorption Mechanism

Sludge based activated carbons (ACs) were used to remove selected pharmaceuticals such as diclofenac (DCF) and nimesulide (NM) from aqueous solutions. The powered sewage sludge was mixed with different proportions of ZnCl2. The mixture was pyrolyzed in a conventional oven using three different temperatures under inert atmosphere. Afterwards, in order to increase the specific surface area and uptake capacity the carbonized materials were acidified with 6mol L-1 HCl under reflux at 80 A degrees C for 3 hours. The characterization of ACs was achieved by scanning electron microscopy, FTIR, TGA, hydrophobicity index by water, n-heptane vapor adsorption and nitrogen adsorption/desorption curves. The specific surface area (S (BET) ) of adsorbents varied between 21.2 and 679.3m(2)g(-1). According to the water and n-heptane analysis data all ACs had hydrophobic surface. Experimental variables such as pH, mass of adsorbent and temperature on the adsorption capacities were studied. The optimum pH, mass of adsorbent and temperature for adsorption of DCF and NM onto ACs were found to be 7.0 (DCF) and 10.0 (NM), 30mg and 25 A degrees C, respectively. The kinetic adsorption was investigated using general-order, pseudo-first order and pseudo-second order kinetic models, while the general-order model described the adsorption process most suitably. The maximum amounts of DCF and NM adsorbed were 156.7 and 66.4mg g(-1) for sample 1(500-15-0.5), respectively.

• 出版日期2016-11