科研之友
微信
新浪微博
Facebook
分享链接
摘要
During the valve fabrication, hard metal is welded to stainless steel or invar alloy for sealing purposes because of its good heat resistance operating at 500 C. However, WC (tungsten carbide) dissolution in weld pool softens the hard metal and decreases mechanical properties near the hard metal/weld interface. In order to analyze the WC dissolution in welded joint, joining of hard metal and invar alloy was carried out using laser-tungsten inert gas hybrid welding method. Microstructures of the weld region, chemical composition were investigated using optical microscope, scanning electron microscopy, and EDAX, respectively. Mechanical properties such as microhardness and four-point bend strength test were performed. Larger and smaller WC dissolution and WC dissolution through transition layer based on thermo-dynamics were discussed. The results thus indicate that WC dissolution led to cellular microstructure, columnar crystal, and transition layer under the effect of laser beam and tungsten arc. WC dissolution was affected by metal ions Fe+, Ni+, Co+ exchange in W-M-C system, and WC grain growth was driven by forces caused by laser beam and tungsten arc in larger WC, smaller WC, and liquid Fe, Ni systems.
- 出版日期2013-2
- 单位上海工程技术大学
