Application-Specific Cross-Layer Optimization Based on Predictive Variable-Latency VLSI Design

作者：De Vivek K; Kahng Andrew B; Karnik Tanay; Liu Bao^*; Maleki Milad; Wang Lu

来源：ACM Journal on Emerging Technologies in Computing Systems, 2015, 12(3): 21.

DOI：10.1145/2746341

• VLSI
• CAD
• optimization
• better-than-worst-case VLSI design
• VLSI statistical timing analysis and optimization

Traditional synchronous VLSI design requires that all computations in a logic stage complete in one clock cycle. This leads to increasingly pessimistic design as technology scaling introduces increasingly significant parametric variations that result in an increasing performance variability. Alternatively, by allowing computations in a logic stage to complete in a variable number of clock cycles, variable-latency design provides relaxed timing constraints for average performance, area, and power consumption optimization. In this article, we present improved variable-latency design techniques including: (1) a generic minimum-intrusion variable-latency VLSI design paradigm, (2) a signal probability-based approximate prediction logic construction method for minimum misprediction rate at minimum cost, and (3) an application-specific cross-layer analysis methodology. Our experiments show that the proposed variable-latency design methodology on average reduces the computation latency by 26.80%(14.65%) at cost of 0.08%(3.4%) area and 0.4%(2.2%) energy consumption increase for the interger (floating point) unit of an open-source SPARC V8 processor LEON2 synthesized with a clock-cycle time between 1.97ns(3.49ns) and 5.96ns(13.74ns) based on the 45nm Nangate open cell library, while an automotive application-specific design further achieves an average latency reduction of 41.8%.

• 出版日期2015-9