Multiwalled Carbon Nanotube Oxygen Sensor: Enhanced Oxygen Sensitivity at Room Temperature and Mechanism of Sensing

作者：Rajavel Krishnarnoorthy; Lalitha Murugan; Radhakrishnan Joghee Kullan; Senthilkumar Lakshmipathi; Kumar Ramasamy Thangavelu Rajendra^*

来源：ACS Applied Materials & Interfaces, 2015, 7(43): 23857-23865.

DOI：10.1021/acsami.5b04869

• carbon nanotubes
• pyrolysis
• defect controlled
• oxygen sensing
• physisorption
• chemisorption

A pyrolysis assisted method was applied for the synthesis of defect controlled carbon nanotubes (CNTs) by varying different growth temperatures. The fabricated resistive devices containing a random network of CNTs were tested for oxygen sensing under standard room-temperature and pressure conditions. Nanotubes grown at moderate growth temperatures (870 degrees C), when exposed to different concentrations of oxygen, displayed a higher sensitivity (3.6%), with fast response and recovery times of about 60 and 180 s, respectively, compared to nanotubes grown at higher and lower temperatures. A room-temperature oxygen detection concentration as low as 0.3% is achieved. The fast response and recovery of CNTs are explained in terms of physisorption of oxygen molecules at (i) carboxyl functional sites and (ii) graphitic carbon sites (pristine CNT) rather than chemisorption at (iii) defected sites. Interestingly, the density functional theory simulated interaction energies (E-ads) of oxygen molecules with defected CNTs (-3.381 eV) and pristine CNTs (-0.753 eV) are higher than that of the carboxyl functional sites (-0.551 eV) and are well correlated with the observed sensing response and recovery times of CNT sensors. Our results show that the carboxyl sites provide lower activation energy or shorter time for desorption of oxygen molecules to yield higher response and fast recovery of the CNT sensors.

• 出版日期2015-11-4