AFM study of the effects of laser surface remelting on the morphology of Al-Fe aerospace alloys

作者：Pariona Moises Meza^*; Teleginski Viviane; dos Santos Kelly; Ribeiro dos Santos Everton Leandro; de Oliveira Camargo de Lima Angela Aparecida; Riva Rudimar

来源：Materials Characterization, 2012, 74: 64-76.

DOI：10.1016/j.matchar.2012.08.011

• Laser surface remelting
• Al-Fe alloys
• Atomic force microscopy
• SEM
• XRD
• Microroughness
• Corrosion

Laser beam welding has recently been incorporated into the fabrication process of aircraft and automobile structures. Surface roughness is an important parameter of product quality that strongly affects the performance of mechanical parts, as well as production costs. This parameter influences the mechanical properties such as fatigue behavior, corrosion resistance, creep life, etc., and other functional characteristics such as friction, wear, light reflection, heat transmission, lubrification, electrical conductivity, etc. The effects of laser surface remelting (LSR) on the morphology of Al-Fe aerospace alloys were examined before and after surface treatments, using optical microscopy (OM), scanning electron microscopy (SEM), low-angle X-ray diffraction (LA-XRD), atomic force microscopy (AFM), microhardness measurements (Vickers hardness), and cyclic voltammetry. This analysis was performed on both laser-treated and untreated sanded surfaces, revealing significant differences. The LA-XRD analysis revealed the presence of alumina, simple metals and metastable intermetallic phases, which considerably improved the microhardness of laser-remelted surfaces. The morphology produced by laser surface remelting enhanced the microstructure of the Al-Fe alloys by reducing their roughness and increasing their hardness. The treated surfaces showed passivity and stability characteristics in the electrolytic medium employed in this study.

• 出版日期2012-12