Normal-Force Control for an In-Pipe Robot According to the Inclination of Pipelines

作者：Park Jungwan^*; Hyun Dongjun; Cho Woong Hee; Kim Tae Hyun; Yang Hyun Seok

来源：IEEE Transactions on Industrial Electronics, 2011, 58(12): 5304-5310.

DOI：10.1109/TIE.2010.2095392

• Compliant active joint
• inclination of pipe estimation
• in-pipe robot
• normal-force estimation
• pipe diameter adaptability

To move freely, in-pipe robots must be able to adapt to the various geometric changes of pipes. Previously, we described an in-pipe robot that can adapt to changes in diameter and curvature of center curves. This robot is able to estimate the forces exerted on the inner surface of the pipes and balance its posture inside the pipe using angular sensors attached to its rotational joints. In this paper, a method is proposed to estimate the relative attitude between the robot's main body and the pipe using the angular sensors attached to a pantograph mechanism. The use of angular sensors makes the structure of the robot simpler and more effective than the use of force or vision sensors because the normal forces and attitude can be estimated from measured angle information. This geometric estimation of attitude relative to the pipes enables the robot to recognize the inclination of the pipes. The PAROYS-II robot can control its normal force according to the variation in pipe inclination. Thus, the proposed method could reduce power consumption and stress on the robot's parts. The algorithm has been validated by multiple experiments.

• 出版日期2011-12