An approach to mapping machining feature to manufacturing feature volume based on geometric reasoning for process planning

作者：Liu, Jinfeng; Liu, Xiaojun; Cheng, Yalong; Ni, Zhonghua^*

来源：Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture , 2017, 231(7): 1204-1216.

DOI：10.1177/0954405415585377

• Manufacturing feature volume
• machining feature faces
• geometric reasoning
• working procedure model
• process planning

Efficient construction in three-dimensional working procedure model has an important effect on the efficiency and quality of machining process planning. This article proposes an algorithm to mapping machining features to manufacturing feature volumes from B-rep of mechanical part, and then, the working procedure models are generated. The mapping strategy is performed in three steps. In the first step, three types of machining features, such as depression feature, protrusion feature and transition feature, are introduced. In the second step, the edges of the chosen seed face and its neighboring faces are searched in order to generate the machining feature faces. The last step applies a closure to the machining feature faces to generate a compact solid by applying additional neighboring faces and their extensions. Then, the working procedure models are formed by combining the mapped manufacturing feature volumes with the final parts model. Compared with the existing working procedure model's generation methods, this approach can avoid the unnecessary conversions from the engineering drawing to three-dimensional process models and from the machining knowledge to the modeling knowledge, which can greatly reduce the planning time on modeling. To validate the feasibility and validity of this approach, two machined parts with complex machining features are tested in the developed prototype computer-aided process planning system.

• 出版日期2017-5
• 单位东南大学