Antifriction and Construction Materials Based on Modified Phenol-Formaldehyde Resins Reinforced with Mineral and Synthetic Fibrous Fillers

作者：Burmistr M V; Boiko V S^*; Lipko E O; Gerasimenko K O; Gomza Yu P; Vesnin R L; Chernyayev A V; Ananchenko B A; Kovalenko V L

来源：Mechanics of Composite Materials, 2014, 50(2): 213-222.

DOI：10.1007/s11029-014-9408-0

• modified phenol-formaldehyde resins
• polymer composite materials
• mineral fibers
• synthetic fibers

Novel polymer composite materials (PCM) based on resole phenol-formaldehyde resins modified with polyamide and reinforced with a combination of organic and inorganic fibrous fillers have been developed. PCM are characterized by a Charpy impact strength of up to 250 kJ/m(2), an ultimate strength in static bending of up to 468 MPa, an ultimate strength in compression of up to 178 MPa, a Martens thermal stability of up to 300 A degrees C, a friction coefficient of up to 0.12, and mass wear of up to 0.76 mg/(cm(2) A center dot km). They can be used for the fabrication of products intended for antifriction and constructional purposes.

• 出版日期2014-5