Metallurgical characterizations of Fe-Cr-Ni-Zr base alloys developed for geological disposal of radioactive hulls

作者：Das N; Sengupta Pranesh^*; Roychowdhury S; Sharma G; Gawde P S; Arya A; Kain V; Kulkarni U D; Chakravartty J K; Dey G K

来源：Journal of Nuclear Materials, 2012, 420(1-3): 559-574.

DOI：10.1016/j.jnucmat.2011.11.008

Alloy melting route is currently being considered for radioactive hulls immobilization. Towards this, wide range of alloys, belonging to Zirconium-Iron binary and Zirconium-Stainless steel pseudo-binary systems have been prepared through vacuum arc melting route. Detail microstructural characterization and quantitative phase analyses of these alloys along with interaction study between Zirconium and Stainless steel coupons at elevated temperatures identify Zr(Fe,Cr)(2), Zr(Fe,Cr), Zr-2(Fe,Cr), Zr-3(Fe,Ni), Zr-3(Fe,Cr), Zr-3(Fe,Cr,Ni), beta-Zr and alpha-Zr as the most commonly occurring phases within the system for Zirconium rich bulk compositions. Nano-indentation studies found Zr(Fe,Cr)(2) and Zr(Fe,Cr) as extremely hard, Zr-3(Fe,Ni) as moderately ductile and beta-Zr, Zr-2(Fe,Cr) as most ductile ones among the phases present. Steam oxidation studies of the alloys, based on weight gain/loss procedure and microstructural characterization of the mixed oxide layers, suggest that each of the alloys responded to the corrosive environment differently. Fe2O3, NiFe2O4, NiO, monoclinic ZrO2 and tetragonal ZrO2 are found to be most common constituents of the oxide layers developed on the alloys. Integrating the microstructural, mechanical and corrosion properties, ZrFeCrNi3 (Zr: 84.00, Fe: 11.20, Cr: 3.20, Ni: 1.60, in wt.%) is identified as the acceptable base alloy for disposal of radioactive hulls.

• 出版日期2012-1