科研之友
微信
新浪微博
Facebook
分享链接
摘要
A computational methodology combining models of precipitation and dispersion strengthening with grain growth and grain boundary hardening has been produced to provide a predictive capability of the microstructure and yield strength of nickel-base superalloys subjected to arbitrary thermal cycles. This methodology has been applied to optimise the post-forging heat treatment of the advanced polycrystalline nickel-base superalloy, RR1000, to provide an improved proof stress. The temperature dependent antiphase boundary energies required were obtained using thermodynamic data and temperature dependent lattice parameters obtained via in situ synchrotron X-ray diffraction. Optimal yield strength properties between 600 and 700 degrees C were predicted with precipitates in the range of 34-57 nm. The precipitation modelling software, PrecipiCalc was used to optimise the solution and ageing heat treatments to maximise the volume fraction of intragranular gamma' precipitates within the target precipitate size range, whilst maintaining a critical minimum volume fraction of primary gamma' to give a grain size of 7 mu m. The optimal yield strength of the material was predicted following a heat treatment consisting of 4 h at 1105 degrees C; cooling to ambient at 40 degrees C s(-1), and ageing for 16 h at 798 degrees C. Tensile testing at 650 degrees C of samples subjected to this heat treatment showed a 125 MPa increase in yield strength over RR1000 in the conventional microstructural condition. However, this was accompanied by a significant loss of ductility.
- 出版日期2014-3
