New methodology of fatigue life evaluation for multiaxially loaded notched components based on two uniaxial strain-controlled tests

作者：Branco Ricardo^*; Prates P A; Costa J D; Berto Filippo; Kotousov Andrei

来源：International Journal of Fatigue, 2018, 111: 308-320.

DOI：10.1016/j.ijfatigue.2018.02.027

• Strain energy density
• Multiaxial loading
• Fatigue life prediction
• Notch effect
• Notched round bars
• Pseudo-elastic stresses

The present paper focuses on the application of the total strain energy density approach to assess fatigue life in notched samples subjected to multiaxial loading. This approach requires, as a starting point, a fatigue master curve defined in terms of total strain energy density versus number of cycles to failure, which is usually determined from a set of uniaxial fatigue tests using smooth standard specimens. In order to reduce the time and cost associated with the generation of the fatigue master curve, a straightforward methodology based on the outcomes of only two uniaxial strain-controlled tests is proposed. The methodology is applied to round bars with U-shaped notches subjected to proportional bending-torsion loading histories. A very good correlation between the experimental and the predicted life of the notched specimens is observed. In addition, the theoretical predictions are nearly independent of the pairs of uniaxial strain-controlled tests selected to obtain the fatigue master curve, which indicates a good robustness of the suggested methodology.

• 出版日期2018-6