Addition of sulfonated silicon dioxide on an anode catalyst layer to improve the performance of a self-humidifying proton exchange membrane fuel cell

作者：Lin Chien Liang^*; Hsu Shih Chieh; Ho Wei Yu

来源：Functional Materials Letters, 2016, 9(2): 1650025.

DOI：10.1142/S1793604716500259

• Self-humidifying
• PEMFC
• sulfonated SiO2

Sulfonated SiO2 was added on an anode catalyst layer to manufacture a hygroscopic electrode for self-humidifying proton exchange membrane fuel cells (PEMFCs). The inherent humidity of a proton exchange membrane (PEM) determines the electrical performance of PEMFCs. To maintain the high moisture content of the PEM, self-humidifying PEMFCs can use the water produced by the fuel cell reaction and, thus, do not require external humidification. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and water contact angle measurement tests were performed to characterize the structures and properties of sulfonated SiO2 and the related electrodes, and the electric current and voltage (I-V) performance curve tests for the fuel cells were conducted under differing gas humidification conditions. When 0.01 mg/cm(2) of sulfonated SiO2 was added, the electrical performance of the fuel cells (50 degrees C) increased 29% and 59% when the fuel cell reaction gases were humidified at 70 degrees C and 50 degrees C, respectively.

• 出版日期2016-4